Delivery terms
Pickup in department For free
Quantity in shop
Central Warehouse | |
Tallinn Office |
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
€3.50
Product description
Product description
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
Compliance
MID Directive 2004/22/EC
EN 50470-1/3
Functioning
A special electronic system under the influence of flowing current and applied voltage generates pulses proportional to the drawn energy. Energy consumption is indicated by a flashing LED. The amount of pulses is converted into energy input, and its value is displayed by the segment LCD display. The fractional digits represent the hundredths (.01 kWh = 10Wh).
Attention!
The meter is equipped with pulse output SO+ - SO-. This allows you to connect another pulse device (SO) that reads pulses generated by the meter.
No additional connected equipment is required for proper operation of the meter.
Technical data
Reference voltage | 230 V AC ±30% |
Current current | 0,25÷5 A |
Maximum current | 50 A |
The minimum measured current | 0,02 A |
Counter's own consumption | 8 VA; 0,4 W |
Scope of indication of the abacus | 0÷99999,99 kWh |
Counter constant | (1 Wh/imp) 1000 imp/kWh |
Reading signaling | LED red |
Pulse output SO + SO- | open collector |
Connection voltage SO + SO- | max. 27 V DC |
Connection current SO + SO- | max. 27 mA |
Pulse time SO + SO- | 70 ms |
Communication protocol | NONE |
Compatibility | MID Directive 2014/32 / EU |
Accuracy class | B |
Terminal | pluggable terminal blocks 6,0 mm² |
Working temperature | -20÷50°C |
Dimensions | 1 module (18 mm) |
Assembly | on rail 35 mm |
Ingress Protection Marking | IP20 |
Connection scheme
Dimensions