Filament Easy PET-G Yellow 1,75 mm 0,85 kg Fiberlogy

• APPLICATION IN 3D PRINTING:

  • END-USE PARTS: containers, holders
  • PROTOTYPES: bottles, packaging
  • ELECTRONICS: covers, cases, products containing diodes
  • DECORATIONS: lamps, glass-resembling elements
  • JEWELLERY: rings, necklaces, bracelets

 

Properties:

• ease of printing
• high durability
• low susceptibility to shrinkage and flossing
• resistance to acids, salts, alkaline substances
• odorless

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	220-250°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

EASY PET-G combines the ease of printing with PLA and high strength comparable to that of the traditional PET-G. Printing with EASY PET-G is free from the deficiencies typical of printing with PET-G such as stringing or filament burning. EASY PET-G is available in opaque and transparent versions. Both forms offer a satisfying final effect in the form of an attractive looking top layer of the printouts. Fiberlogy EASY PET-G will work great both for printing functional models and decorative elements. PROPERTIES: - ease of printing - high durability - low susceptibility to shrinkage and flossing - resistance to acids, salts, alkaline substances - odorless