Extralink JKD-512COM | Smoke detector | carbon monoxide detector, EXTRALINK

Jikaida Chad Detector JKD-512COM

Jikaida JKD 512COM combi CO detector home fire alarm with siren 2 in 1 is designed to activate the siren when the limit concentration of carbon monoxide is exceeded or there is smoke in the room. It is basically 2 sensors in one: home carbon monoxide detector fire alarm sensor (fire detector) siren for audible warning.

Long autonomous operation

This wireless sensor operates completely autonomously using 3 AA batteries. Good batteries will last up to six months. The sensor has a low battery indicator and when it starts beeping every 30 seconds and displays a low battery icon on the display, the batteries need to be replaced.

Easy to install and use

TheJikaida JKD-512COM has no settings and there is a single "Test" button on the housing to self-test the sensor and check the current carbon monoxide and smoke values in the room. Simply insert the batteries and hang it from the ceiling of a room where carbon monoxide or fire is likely to occur, with ceiling heights up to 12 metres.

As a home carbon monoxide detector - it will activate an audible siren if the carbon monoxide concentration in the room exceeds 300 PPM. As a fire smoke detector - will activate the siren if the smoke concentration in the room exceeds 0.1%db/m. You can also check the current smoke or carbon monoxide concentration at any time by pressing the "test" button.

Main functions and features

Main functions and features

• 2 detectors in one housing: home carbon monoxide detector wireless smoke detector. Designed for local audible notification of a fire or exceeding the acceptable concentration of carbon monoxide in the room.
• Highly reliable electrochemical carbon monoxide sensor and infrared photoelectric sensor.
• Backlit LCD screen - displays the carbon monoxide level or smoke level in the room. Also indicates low battery.
• Powered by 3 AA batteries - enough for 6 months of stand-alone use.
• Low battery warning - allows you to change the battery in time for the sensor to operate continuously.
• Carbon monoxide/smoke memory function - remembers carbon monoxide readings when detected.
• Dual alarm notification: audible siren and flashing light.