Smart carbon monoxide detector with siren, 230Vac, Wi-Fi, TUYA / Smart Life
Pickup in department 1-5 b.d.
 >10 pcs | Central Warehouse |
 Not available | Tallinn Office |
Home delivery 1-5 b.d.
Delivery to DPD Pickup locations 1-5 b.d.
Products purchased together
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
| >10 pcs | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
Product Description
Intelligent Wi-Fi carbon monoxide detector is designed with wifi networking technology and is used to detect carbon monoxide gas. The detector adopts high-performance electrochemical sensor, with sound and light alarm output. Alarm relay output, can work with electromagnetic valve. It has the characteristics of high stability and sensitivity. The alarm information is transmitted to the user APP through the cloud, which is simple and clear.
Electrical Specifications
Working Voltage: 110~230VAC 50HZ
Standby working current: 1.5W
Alarm Volume: 85dB/1m
Alarm Output: Relay Output（ NC),
Control Output: 12V Solenoid valve output
WIFI: 2.4G -- 802.11 b/g/n.
Button: Test Mute button/ Test button.
Alarm concentration: 30 ppm, alarm within 2 minutes
50 ppm, alarm withing 60-90 minutes
100ppm alarm within 10-40 minutes
300ppm, alarm within 3 minutes
Working Temperature: -10~50°C.
Working Humidity: 10%~95% RH.
Functionality
Single-storey house: in order to increase safety factor, it is recommended install one detector in each bedroom, install one detector in the place 6m away from the fire chimney and gas equipment.Multi-storey house: in order to increase the safety factor, it is recommended to install at least one detector in each bedroom, at least one detector in the basement, and one detector at the place 6m away from the fire and gas equipment.
Installation
1. Install the detector near the bedroom or living area that carbon monoxide leak might happen, confirm the alarm voice can be heard when you sleep.
2. It is better not to install the detector in the garage, kitchen and boiler room that may cause false alarm. Avoid the area that are dirty, dusty or greasy environment, which will damage the sensor and make it work improperly.
Warning
1. The detector cannot detect natural gas (methane), propane, butane or other combustible gases.
2. Clean it once a month with household vacuum cleaner and soft brush.
3. Do not wipe the detector with detergent or solvent. Avoid spraying air freshener, hair spray paint or other aerosol on its accessories.
4. Pay attention to the alarm. Shut off the pipe valve immediately, open the window to keep the indoor air circulation. Strengthen your fire awareness in everyday life.
