Resin for 3D printer, 8K Standard Plus, almond 1kg JAMG HE
Pickup in department 1-5 b.d.
 7 pcs | Central Warehouse |
 Not available | Tallinn Office |
Home delivery 1-5 b.d.
Delivery to DPD Pickup locations 1-5 b.d.
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
| 7 pcs | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
Jamg he 10K Standard resin is High Precision resin, printing with it will let your model get more detail to be shown, and just like you are creating an artist.
- High Prescission
- Low Viscosity
- Less Shrinkage
- Smooth Surface
- Low Odor
High Precision and Low Shrinkage: Jamg he 10k standard resin can be printed more specific detail it is because the special formula
Low Odor-JAMG HE standard Resin has lower irritation odor than other resin and it will let you more enjoy the whole printing process
Multiple colors for you to choose,and you can combine different colors to creat one new color,well Compatible with All kinds of 3D printer 385-405nm in the market and wide use in varity area like home, office, school, etc. eco-friendly 3d printing resin and used in the production of toys, carton figures, education, dental models, etc.
better curing and excellent stability: Jamg he standard resin can be cured in very short time and very stable in some extremely environment
Low Viscosity-low Viscosity is one main character of excellent resin, it will help you to print less failure, JAMG HE 10K standard Resin is low Viscosity resin and will assist you to print more successful with less worried.
Specification:
- Density(g/cm3): 1.05~1.25g/cm3
- Viscosity (MPa·s): 70~175mPa·s
- Maximum force(KGF): 133.4±10%
- Tensile Strength（MPa): 31.44±10%
- Deformation point of maximum force(mm): 4.33±10%
- Elongation at Break(%): 7.65±10%
- Maximum bending strength(MPa): 40.82±10%
- Impact strength(j/m): 50±10%
Precautions:
Fully shaking before usage, shake like up side down will be better.
Please Wear gloves and mask during whole print process to avoid skin contact directly, if you get the resin on your skin unfortunately, please wash with water immediately until clean it up.
Resin is one kind of speical chemisty product, please keep away from children, sunlight shining and dust.
Brush it gently with a soft brush when model complete, and dry it up with cool wind, these steps will let you get the model in better condition.
