Raspberry Pi M.2 HAT+ for NVMe drives and M.2 accessories for Raspberry Pi 5

Raspberry Pi SC1166 M.2 HAT+ for Raspberry Pi 5 - Raspberry Pi M.2 HAT+ for Pi 5 allows users to connect M.2-format PCIe and NVMe devices to the PCIe FPC connector on Raspberry Pi 5.

This HAT+ is an adapter board that supports 2230 and 2242 formats M.2 Non-Volatile Memory Express (NVMe) drives in both PCI Express Gen-2 and higher-performance Gen-3. The M.2 HAT+ for Pi 5 conforms to the HAT+ specifications and is automatically detected by the newer Raspberry Pi software/firmware.

This adaptor board is supplied with a 16mm stacking header and spacers/screws to be fitted to a Raspberry Pi 5 with the Active Cooler in place. The 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories. The M.2 HAT+ board comes in 65.1mm x 56.7mm x 5.6mm dimensions and 13g weight.

 

• 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories
• Conforms to the HAT+ specification
• Automatically detected by the new Raspberry Pi software/firmware
• Supplied with a 16mm stacking header and spacers/screws to enable the M.2 HAT+ to be fitted to a Raspberry Pi 5 with the Active Cooler in place
• 65.1mm x 56.7mm x 5.6mm (max) (L x W x H) dimensions 13 grams weight

Raspberry Pi M.2 HAT+ allows you to connect M.2 peripherals, such as NVMe drives and AI accelerators, to the PCIe 2.0 interface on Raspberry Pi 5. It provides fast data transfer up to 500 MB/s . Supports 2230 and 2242 formats for M.2 devices with an M key.