Multi-Silicone Grease OKS 1110 for Fittings, Seals & Plastic Parts (10 ml) NLGI 3
Pickup in department 1-5 b.d.
 >10 pcs | Central Warehouse |
 Not available | Tallinn Office |
Home delivery 1-5 b.d.
Delivery to DPD Pickup locations 1-5 b.d.
Products purchased together
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
| >10 pcs | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
OKS 1110 – Multi-Silicone Grease
Highly adhesive transparent silicone grease for fittings, seals and plastic parts.
Areas of application
• Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators
• Lubrication of O-rings and rubber seals for assembly and during operation
• Lubrication of plastic parts
Advantages and benefits
• NSF H1 registered
• Tasteless and odourless
• Highly effective due to excellent adhesion on all materials
• Neutral behaviour with regard to plastics and elastomers
• Completely EPDM-compatible
• High long-term stability without drying out, hardening or bleeding
• Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
• MOSH/MOAH-free
Technical specifications
• Operating temperature: -40 °C → +200 °C
• NLGI grade: 3
• Base oil viscosity (40 °C): 9,500 mm²/s
Applications
Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.
