Microcontroller NANO V4 with ATmega328PB chip JOY-IT
Product Code: ARD-NanoV4
Delivery terms
Pickup in department
Pickup in department For free
Orders are processed and shipped on weekdays from 8:00 a.m. to 5:00 p.m.
When your order is ready for collection, we will inform you by SMS and e-mail.
Quantity in shop
 Not available | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
After handing over the goods to the courier, we will notify you by e-mail. Free delivery for orders over 25€.
€3.50
Product description
Weight
0.01 kg.
Brand
The ARD-NanoV4 is a particularly small microcontroller and, due to the pin header leading out at the bottom, has been specially developed for working with plug-in boards.
The integrated USB Type-C interface can be used to supply both the circuit and the board with power, as well as to transfer programs to the microcontroller. The NanoV4 is fully compatible with the Arduino Nano V3.
MICROCONTROLLER: Atmel Mega328PB
BOOTLOADER; ATmega328P
CLOCK FREQUENCY: 16 MHz
LOGIC LEVEL: 5 V
ANALOG PINS: 8
DIGITAL PINS: 14 (of which 6 PWM)
SPECIAL FEATURE: Fully Arduino compatible, USB-C interface
DC CURRENT PER I/O PIN: 40 mA
MEMORY: 32 kB (2 kB for bootloader)
SRAM: 2 kB
EEPROM: 1 kB
SUPPLY VOLTAGE: Vin-PIN: 7 - 12 V USB Type-C: 5 V
POWER REQUIREMENTS: 20 mA
DIMENSIONS: 18,5 x 47 mm
Useful information
Specifications
Related products
Other products of the same brand
Other products in this category
Supplier product description
The ARD-NanoV4 is a particularly small microcontroller and, due to the pin header leading out at the bottom, has been specially developed for working with plug-in boards.
The integrated USB Type-C interface can be used to supply both the circuit and the board with power, as well as to transfer programs to the microcontroller. The NanoV4 is fully compatible with the Arduino Nano V3.
Useful information
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].
