LED digital strip programmable controller 5Vdc with SD card
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
 Not available | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
NOTE：
1. When T-1000S controller less than 512 pixels the frame rate can reach 30fps. When T-1000S control more than 512 pixels the frame rate will slow down automatically.
2. T-1000S must use the new software LedEdit 2012.
Multiple T-1000S controllers can be cascaded together and work synchronous
T-1000S one TTL(SPI) signal and one RS485 signal port output，can control 2048 pixels
When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller
If you need to use RS485 signal you need to connect controller A with LED A (DMX+), controller B with LED B(DMX-)
When you need to built a new project the controller type for the software is：T-1000-IC model
Special parameters:
Memory card：
type：SD card（suggest using high-speed SD card）
Capacity：128MB—2GB
Store file：*.led
Physical parameters：
Working temperature ：-30℃—85℃
Working voltage：DC5V / DC7.5-24V
Working power：1W
Size：16cm x 9cm x 2cm
Weight：253g
Signal port：3pin connect port
