Filament PLA Glow in the dark green 1.75mm 0.5kg Rosa3D
Pickup in department 1-5 b.d.
 5 pcs | Central Warehouse |
 Not available | Tallinn Office |
Home delivery 1-5 b.d.
Delivery to DPD Pickup locations 1-5 b.d.
Products purchased together
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
| 5 pcs | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.
PLA Starter Glow in the Dark Green filament has a unique ability. It can glow in the dark! Simply expose it to natural or artificial light and it will emit a phosphorescent, green glow in the dark.
PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer.
Recommended printing parameters:
- extrusion temperature 185-225°C
- bed temperature: 40-60°C
- fan: 50-100%
- print speed: 60-80 mm/s
The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.
PRODUCT PARAMETERS
- Color: glow in the dark green
- Diameter: 1.75 mm
- Weight: 500 g (vacuum packed)
- Density: 1.24 g/cm3
- Odor: odorless
- Heat deformation temperature: 55°C (ASTM E2092)
- Diameter tolerance: +/- 0,05
- Oval tolerance: +/- 0,05
- Tensile elongation: 6 %
- Tensile strength (to break): 53 MPa
