DC-UPS All In One 12V - 24V 280W, MODbus, DIN rail mount, Adelsystem
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
 Not available | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
The CBIs combine the functions of Power Supply with those of Back Up Module and of Battery Charger. They use switching technology with microcontrollers and optimize the loading and unloading times of the accumulator without a deep discharge, the switching from the battery to the charger without any interruption, automatic protection without fuse against the reserve polarity, short circuit and overload and overvoltage.
They carry out diagnostic checks on the inner battery through the Life Test, enabling the users to select the most appropriate charging curve to maximize the efficiency of the system and to guarantee a long-life battery while intensifying its performances. They are equipped with relays to warn against the power outage and the defective battery. They conform to the most innovative battery management as well as electrical safety standards. They can be mounted on DIN Rails.
Output voltage selectable by jumper 12V or 24V.
Specifications:
| Model | CBI2801224A |
| INPUT | |
| Nominal input voltage AC | 115V - 230V - 277V |
| Voltage range AC | 90V - 135V; 180V - 305V |
| Inrush Current (Vn – In nom. Load) I2t | ≤16A <5ms |
| freequency | 47Hz - 63Hz |
| Input current (115V - 230V AC) | 3,3A - 2,2A |
| Internal fuse (not replaceable) | 6,3A |
| External fuse (recomended) MCB curve B | 16A |
| OUTPUT DATA (internal power supply) | |
| Output voltage (Vn) | 12 or 24 Vdc, selectable by jumper |
| Output current (In) | In |
| Efficiency (at 50% of rated load) | ≥91% |
| Residual ripple | ≤80mVpp |
| Turn-On delay after applying mains volrage | 1,0s (max) |
| Start-up with strong load (capacitive load) | Yes (unlimited) |
| Dissipatio load power max | 28W |
| Short-circuit protection | Yes |
| Overload protection | Yes |
| Overvoltage output protection | Yes (Typ. 35V DC) |
| Overheating thermal protection | Yes |
| BATTERY OUTPUT | |
| Boost charge (at In, 25 0C) | 2.4 V/cell. |
| Max. Time Boost-Bulk charge (typ. at IN) | 15h |
| Min. Time Boost-Bulk charge (typ. at IN) | 1min. |
Float charge (at In, 25 0C) | 27,5V DC |
| Jumper configuration battery type (V/cell) | 2,23V; 2,25V; 2,27V; 2,30V; NiCd-1,50V |
| Recovery charge 12V/24V | 2 – 10Vdc / 2 – 20Vdc |
Charging current max Ibat | In ±5% |
Charging current limiting Iadj | 10 - 100% / Ibat |
| Reverse battery protection | Yes |
| Sulfated battery check | Yes, by jumper |
| Short circuit element detection | Yes |
| Quiescent current max. | ≤5mA |
| Charging curve automatic IUoUo | 4 stage |
| Remote input control (RTCON cable) | Boost/float |
| LOAD OUTPUT | |
Output voltage (at In) | By internal power supply |
Continuos current (without battery) | Iload = In |
Continuos current (with battery) Iload = In + Ibat | Iload = 2x In |
Max. current Output Load (Main) Iload (4sec.) | Iload =3x In MAX |
Max. current Output Load (Back Up) Iload (4sec.) | Iload =2x In MAX |
| Start From Battery Without Main (Remote Input Control) | RTCONN (cable); Push Button |
| Time Buffering; min (switch output off without main input) | 0.5; 2.5; 10; 15; 20; 30; 45; 60; ∞ |
| Threshold alarm Battery almost flat 12V/24V | 10 – 11 / 20 – 21 Vbatt |
| LVD. (Protections against total Battery discharge) 12V/24V | 9 – 10 / 19 – 20 Vbatt |
| If connected inparallel with the same product | - |
| Load Output 24 Vdc (jumper selection) | |
Output voltage (at In) | 22 - 28.8 Vdc |
Nominal current In | 10A ±5% |
| Load Output 12 Vdc (jumper selection) | |
Output voltage (at In) | 10 - 14.4 Vdc |
Nominal current In | 15A ±5% |
| CLIMATIC DATA | |
| Ambient temperature (operation) | -25 ÷ +70°C |
| De Rating Ta > 50°C | - 2.5%(In) / °C |
| Ambient temperature Storage | -40 ÷ +85°C |
| Humidity at 25 °C no condensation | 95% to 25°C |
| Altitude: 0 to 2 000m - 0 to 6 560ft | No restrictions |
| Altitude: 2 000 to 6 000m - 6 560 to 20 000 ft | De-rating 5°C/1000m |
| Cooling | Auto convention |
| GENERAL DATA | |
| Insulation voltage (IN/OUT) | 3000 Vac |
| Insulation voltage (Input / ground) | 1605 Vac |
| Insulation voltage (Output / ground) | 500 Vac |
| Protection Class (EN/IEC 60529) | IP20 |
| Reliability: MTBF IEC 61709 | > 300.000 h |
| Pollution Degree Environment | 2 |
| Connection Terminal Blocks screw Type | 2,5mm (24–14AWG) |
| Protection class (PE Connected) | I, with PE |
| Dimensions (w-h-d) | 100x115x135 mm |
| Weight | 0,85 kg approx. |
| Signal Output (free switch contacts) | |
| Main or Backup Input Power | Yes |
| Low Battery | Yes |
| Fault Battery or system | Yes |
| TYPE OF SIGNAL OUTPUT CONTACT | |
| Dry Contact. Current can be switched (EN60947.4.1): Max: DC1: 30 Vdc 1 A; AC1: 60 Vac 1A (Resistive load ) Min: 1mA at 5 Vdc (Min permissive load) | |
| Fault System / Low Battery | C NC NO |
| Main or Back Up | C NC NO |
| SIGNAL INPUT / OUTPUT (RJ45) | |
| Temp. Comp. Battery (with external probe): Aux Out | RJ Temp (cable); Aux1 |
| Remote monitoring data | RJ45; Aux2 – Aux3; Modbus RTU |
For more information, please, visit manufacturers website: https://www.adelsystem.com/en/products/uninterruptible-power-supply-output-dc-cbi/datasheet/
Useful information
Specifications
Other products of the same brand
Other products in this category
Experimental product description generated by artificial intelligence
ADEL system DC-UPS All In One 12V-24V 280W
The ADEL system DC-UPS All In One is a versatile uninterruptible power supply (UPS) designed for security applications. This all-in-one device combines a power supply, battery charger, and backup module into a single, compact unit.
Key Features
- All-in-one design: Power supply, battery charger, and backup module in one device.
- Wide input voltage range: Accepts 115-230-277 Vac input.
- Multiple output options: Available in 12Vdc and 24Vdc configurations.
- MODbus communication: Enables remote monitoring and control.
- DIN rail mount: Easy installation in control panels.
- Battery Care algorithm: Ensures efficient charging, optimization, and diagnostics.
- Protection features: Safeguards against short circuits, overloads, and reverse polarity.
Applications
Ideal for various security systems requiring reliable backup power, including:
- CCTV systems
- Access control systems
- Alarm systems
- Other critical security equipment
Why Choose ADEL system DC-UPS All In One?
The ADEL system DC-UPS All In One offers a cost-effective and space-saving solution for securing your power needs. Its advanced features, including the Battery Care algorithm and MODbus communication, provide reliable performance and easy management. Choose ADEL system for dependable power protection in your security applications.
| Parameter | Value |
|---|---|
| Input Voltage | 115-230-277 Vac |
| Output Voltage | 12Vdc or 24Vdc (selectable) |
| Power | 280W |
| Mounting | DIN rail |
| Communication | MODbus |
This description is generated using artificial intelligence (AI) and may differ from the actual product. Common AI errors may include:
- Inaccurate product features: some technical specifications, colors, sizes or other parameters may be inaccurate or omitted.
- Incorrect compatibility information: AI may provide incorrect information about the compatibility of products with other devices or systems.
- Overly Optimistic Functions: in some cases functions may be provided whose product iš doesnt really have.
- Name or Model Discrepancies: AI may misrepresent the product name or model.
If you notice inconsistencies or have questions about the description, please contact us before purchasing the product, please contact us by e-mail toš you: [email protected].
