Continuous servomotor with wheel 1.5kg/cm (6V)
Products purchased together
Delivery terms
Pickup in department
Pickup in department For free
Quantity in shop
 Not available | Central Warehouse |
| Not available | Tallinn Office |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €4.50 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
€3.50
Product description
Servo motor FS90R
This continuous servo motor FS90R with an 6 cm large wheel is due to its compact size perfect for control and regulation of small loads and thus a good choice for engineering. Operated with 5 V, this servo motor has a peak torque of up to 1,5 kg/cm.
Please note: This is a continuous servo motor. Unlike a conventional servo motor, this one uses a PWM signal to set the speed and direction of rotation instead of the position.
Specifications
| Peak torque | 1,5 kg/cm |
| Rotations (without load) | 110-130 rpm |
| Voltage supply | 4 - 6V DC |
| Operating voltage | 4.8 - 6 V |
| Operating current | 100 - 120 mA |
| Idle current | 5 - 6 mA |
| Stall current | 550 - 650 mA |
| Gear spline | Plastic (Nylon and POM) |
| Horn gear spline | 20T (4.8mm) |
| Horn type | Plastic |
| Connection wire length | 200 mm |
| Command signal | Pulse width modulation |
| Amplifier type | Analog comparator |
| Pulse width range | 700 - 2300 µs |
| Dead band width | 90 µs |
| Default stop position | 1500 (+/-45) µs |
| Rotating direction CW | 700-1500 µs |
| Rotating direction CCW | 1500 - 2300 µs |
| Dimensions of Wheel | Ø60mm x 8mm, 10g |
| Dimensions | 32,6mm x 32mm x 12,5mm |
| Weight | 9g |
| Set included | Servo variklis, ratukas, tvirtinimo priedai |
Useful information
Specifications
Supplier product description
Operated with 5 V, this servo motor has a peak torque of up to 1,5 kg/cm.
Technical data:
Peak torque: 1,5 kg/cm
Rotations ( without load ): 110-130 rpm
Voltage supply: 4-6V DC
Operating voltage: 4.8 - 6 V
Operating current: 100 - 120 mA
Idle current: 5-6 mA
Stall current: 550-650 mA
Gear spline: Plastic ( Nylon and POM )
Horn gear spline: 20T ( 4.8mm )
Horn type: Plastic
Connection wire length: 200 mm
Command signal: Pulse width modulation
Amplifier type: Analog comparator
Pulse width range: 700-2300 µsec
Dead band width: 90 µsec
Default stop position: 1500 ( +/-45 ) µsec
Rotating direction CW: when 700-1500 µsec
Rotating direction CCW: when 1500 - 2300 µsec
