Charger Skyla-TG 24/50 (1+1) 230Vac

One full rated power and one 4A output power. The charging voltage can be fine-tuned to any battery system. The charger input is 230V at 50/60 Hz. The charging voltage can be measured directly at the battery terminals to compensate for voltage loss due to cable resistance. An external sensor allows the temperature of the battery to be measured and the charging voltage to be compensated accordingly.

Functions

Perfect chargers for any type of battery

The charging voltage can be precisely adjusted to any sealed or unsealed battery system.In particular, properlysealed, maintenance-free batteries need to be sealed to ensure a long service life. Over-voltage willcause a sealed battery to be gassed and vented. The battery will dry out and fail.

Suitable for AC and DC operation (AC and DC operation)

Chargers also accept DC power, except for 3-phase input models.

Controlled charging

Each TG Charger is equipped with a microprocessor that precisely controls charging in three steps. The charging process follows the IUoUo characteristic and charges faster than other processes.

Using TG Chargers as a power source

Due to the fully stabilised output voltage, the TG charger can be used as a power supply in the absence of batteries or large buffer capacitors.

Two outputs for charging 2 battery banks (24V models only)

"TG Chargers have 2 isolated outputs. Thesecond output, limited to approx. 4A and with a slightly lower output voltage, is intended for recharging the starter battery.

To increase battery life: temperature compensation

Each Skylla TG charger is equipped with a battery temperature sensor. When connected, the charging voltage will automatically decrease as the battery temperature increases. This feature is particularly recommended for sealed batteries, which can become overcharged and dry as a result of discharge.

Battery voltage sensing

To compensate for voltage loss due to cable resistance, TG Chargers are equipped with a voltage sensor so that the battery always receives the correct charging voltage.

The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].

One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.