Delivery terms
2025-03-11 Estimated delivery
Product will be ordered from supplier. If the supplier is unable to deliver by the specified date, we will inform you by e-mail
 Available | Supplier Warehouse |
Home delivery
Home delivery
After handing over the goods to the courier, we will inform you by e-mail. If you are ordering outside of Estonia please use www.lemona-electronics.eu to order.
Over €25.00 (Orders up to 1000 kgs) | For free |
To €25.00 (Orders up to 1000 kgs) | €5.00 |
Delivery to DPD pickup locations
Delivery to DPD pickup locations
After handing over the goods to the courier, we will notify you by e-mail. Free delivery for orders over 25€.
€3.50
Product description
Access control reader Ubiquiti UniFi UA-G3-Flex-B
Specifications
Supplier product description
- Type: Access control system reader
- Model: UA-G3-Flex-B
- Color: Black
- Brand: UBIQUITI
- Connector: 1 x 10/100MbE RJ45
- Wireless technologies: BLE 4.1, NFC
- Power supply: PoE, 44-57V DC, 5W
- NFC frequency: 13.56 MHz
- Features: Keyboard, Apple Touch Pass support
- Protection rating: IP55
- Operating temperature: -30...60°C
- General
- Dimensions84 x 84 x 40.8 mm (3.3 x 3.3 x 1.6")
- Weight165 g (5.8 oz)
- Enclosure materialPolycarbonate, glass, aluminium alloy
- Mounting materialPolycarbonate, aluminum alloy
- MountingWall, gang box, junction box
- WeatherproofingIP55
- Networking interface(1) 10/100 MbE RJ45 port
- ConnectivityBLE 4.1, NFC
- Power methodPoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range44–57V DC
- Max. power consumption5W
- Sensor(12) Capacitive buttons
- Speaker(1) 8 ohm, 1W
- LEDsR/G/B/W
- Button(1) Factory-reset
- NFC frequency13.56 MHz
- NFC read range< 30 mm
- NFC technologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T, T5T, ECP 2.0
- Operating environmentOutdoor use
- Ambient operating temperature-30 to 60° C (-22 to 140° F)
- Ambient operating humidity5 to 90% noncondensing
- Software informationThe software version of a product can be checked at https://unifi.ui.com
- UL 294 levelDestructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
- UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
- CAN/ULC-60839-11-1 GradeGrade assignment: I
- CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision levelUA-G3-Flex V01
Supplier parameters
Category
Access cont
Brand
Ubiquiti
Supplier's product code
UBIQUAG3FLEXB
Product ID
U-4460874
Product code
UBIQUAG3FLEXB
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].