Kättetoimetamise tähtajad
2025-02-18 Kui tellite praegu on eeldatav kohaletoimetamise kuupäev
Kaup tellitakse tarnija laost. Kui tarnijal ei ole võimalik tarnida kaupa näidatud kuupäevani, informeerime teid epostitsi.
Saadaval | Tarnija ladu |
Kulleriga koju
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
25,00 €-le (Tellimused kuni 1000 kgs) | 4,50 € |
Kohaletoimetamine DPD pakiautomaatidele
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.
3,50 €
Tehnilised andmed
Tarnija toote kirjeldus
This tiny breakout board features the ADMP401 MEMS microphone. One of the key advantages of this breakout and microphone is the bottom ported input. This means the microphone's input can fit flush against the enclosure of your project. The amplifier on the breakout has a gain of 67 and meets the bandwidth requirements of the mic.
The amplifier's AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak output of about 200mV when the microphone is held at arm's length and is being talked into at normal conversational volume levels. So the AUD output can easily be connected to the ADC of a micro.
The amplifier's AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak output of about 200mV when the microphone is held at arm's length and is being talked into at normal conversational volume levels. So the AUD output can easily be connected to the ADC of a micro.
Technical data:
Model: ADMP401MEMS Microphone
MEMS: Omnidirectional
Special feature: Small dimensions
Voltage supply: 1.5 - 3.3 V DC
Working current: 250 μA
Peak output: 200 mV
Standby output: 1,5 VCC
Output: 40 mW
Signal to noise ratio (SNR): -62 dBA
Roll off: -3dB at 100Hz & 15kHz
Signal-to-Noise ratio: -62 dBA
Temperature range: -40 - 80°C
Kasulik informatsioon
Tarnija toote parameetrid
Product code
COM-MIC-ADMP401
Brand
Joy-iT
Supplier's product code
COM-MIC-ADMP401
Product ID
U-2614713
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].