Joy-iT ARD_R3DIP microcontroller ( Arduino-compatible )
Tootekood: ARD_R3DIP
Foto on illustratiivne. Toote täpseid tehnilisi parameetreid vaadake kirjeldusest.
Kättetoimetamise tähtajad
2025-03-11 Kui tellite praegu on eeldatav kohaletoimetamise kuupäev
Kaup tellitakse tarnija laost. Kui tarnijal ei ole võimalik tarnida kaupa näidatud kuupäevani, informeerime teid epostitsi.
 Saadaval | Tarnija ladu |
Kulleriga koju
Kulleriga koju
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
25,00 €-le (Tellimused kuni 1000 kgs) | 5,00 € |
Kohaletoimetamine DPD pakiautomaatidele
Kohaletoimetamine DPD pakiautomaatidele
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.Tellimused üle 25,00 € toimetatakse kohale tasuta.
3,50 €
Kauba kirjeldus
Joy-iT ARD_R3DIP microcontroller ( Arduino-compatible )
Kasulik informatsioon
Tehnilised andmed
Tarnija toote kirjeldus
The R3DIP Board (Arduino UNO-compatible) is the right microcontroller for beginners who want to get into the programming world quickly and easily.
Its ATMega328 microcontroller gives you enough performance to implement your ideas and projects.
It measures 68 x 53 mm and has many connectivity options with 14 digital inputs and outputs and 6 analog inputs.
The board has an USB Type B connector, that you can program it quickly and easily using the familiar Arduino IDE programming environment.
The Joy-IT R3DIP with the plug-in systems and circuits can be supplied with power both via the USB port and alternatively via its own power connection.
Please note: In order for the Joy-IT R3DIP to be recognized by the Arduino IDE software, the interface driver CH341 must be installed at first.
Its ATMega328 microcontroller gives you enough performance to implement your ideas and projects.
It measures 68 x 53 mm and has many connectivity options with 14 digital inputs and outputs and 6 analog inputs.
The board has an USB Type B connector, that you can program it quickly and easily using the familiar Arduino IDE programming environment.
The Joy-IT R3DIP with the plug-in systems and circuits can be supplied with power both via the USB port and alternatively via its own power connection.
Please note: In order for the Joy-IT R3DIP to be recognized by the Arduino IDE software, the interface driver CH341 must be installed at first.
Technical data:
Model: Joy-IT board ARD_R3DIP
Microcontroller: ATmega328
Flash: 32 KB
SRAM: 2 KB
EEPROM: 1 x
Voltage: 5V, 50mA
Interfaces: 14x digital I/O Pins, 6x with PWM, 1x USB, 1x SPI, 1x I2C, 1xICSP
Kasulik informatsioon
Tarnija toote parameetrid
Product code
ARD_R3DIP
Brand
Joy-iT
Supplier's product code
ARD_R3DIP
Product ID
U-4456850
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].